May Need a Part Made for Equitorial Mount

I seem to remeber from some of the posts I have read in the past on equipemnt that there is a company (or someone) out there that will manufacture or mill a needed part that can't be otherwise found or purchased. I have an EQ2, which only mounts with the rings directly bolted to the plate on the top of the mount. I would like to adpat it to handle a dovetale plate and use a different ring setup. I may need to have a steel or aluminum bar made that would seve as a mounting base that I can attach to the EQ2 and subsequently attach the doevetail plate to it. Anybody know if there is a business out there that could machine steel and aluminum for something like this? With the right equipment and know how it may even be fairly simple.
Lynn

preciseparts (dot com) may be able to help you.
Bob

Hi Lynn,

If you have a drill and saw, cut two rectangle out of aluminium stock bar (or hardwood) of the same thickness as the raised edge and drill a center 1/4" hole. Using approriate length 1/4"-20 bolts, bolt both the rectangle and dovetail saddle ( as shown by John ) together. The rectangle act like a thick washer. Hope it helps.

Steven