Meade LX-6

I have a Meade LX-6 and i just got it. I was wondering how to make the motor drive work? It says in the manuel that when you turn the control pannel on that the motor comes on with it, and that you can hear it if you put your ear to it. I did and i hear nothing, i just wanna make sure that its on. If you could tell me anything about it i would appreciate it.

Thanks

If you check the control panel, there is a meter to tell if current is present. That way you know at least that power is reaching the unit. (Unless the meter is faulty of course!) Next, remember that the motor runs very slowly and is a faint whirring sound. Some are so quiet as to seem inaudible. The easiest way is to lock the r.a. lever in place and leave the scope on for an hour or so- then check to see if it's moved in position on the r.a. dial.

Good luck. I hope it's okay.