Re: Moisture Inside a SCT....????

Started by fblue, 12/28/2003 12:17AM
Posted 12/28/2003 12:17AM Opening Post
Air blown into the focus tube will dry it out, a hair drier at a low setting for heat would be what I would try that you should already have.
If it is Fastar then you can also remove the secondary to sppe the process.
Floyd

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 12/28/2003 01:30AM #1
I'm with you, John - there's no telling what a hair dryer will pick up from the air - there's no filter - and it's going to inject it into the tube at a fairly high velocity....
Posted 12/28/2003 06:57PM #2
Anything to get that moisture out of the system. It could grow mildew on the corrector plate and that would be a disaster.
Floyd

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager