Image of the day

Captured by
Arthur Hogan

Wizard Nebula

My Account

New to Astromart?

Register an account...

Need Help?

Fixing a broken eyepiece(?)

Started by SmokeDaddy, 07/05/2007 04:04PM
Posted 07/05/2007 04:04PM | Edited 07/05/2007 04:33PM Opening Post
Hello,

I have an old broken brass Kellner(?) eyepiece that I would like to repair. Anyone have any ideas where to start, including the proper way to get the broken lens out? The lens that I am holding between my fingers measures 1.180" (and it's not the broken one). I know absolutely nothing about eyepice design or their construction. Any help would be appreciated. I know when viewing through it the Moon fills the view in the eyepiece.

I know I can look on the Surplus Shed but I don't know what to look for? Either in focal length or even what to select?





Attached Image:

SmokeDaddy's attachment for post 37742
Posted 07/05/2007 04:06PM #1
another view ...



Attached Image:

SmokeDaddy's attachment for post 115182
Posted 07/05/2007 04:09PM #2
last image ...


Attached Image:

SmokeDaddy's attachment for post 115183
Posted 07/05/2007 11:31PM #3
From what you have shown us, I wouldn't be surprised to see that the eyepiece is an old symmetrical design, two identical achromats facing each other with only a small gap between. In your case, two 30mm dia x 45mm FL spaced to give about 1" focal length eyepiece.

Use the Surplus Shed lens finder to get an idea of what is available then give Fred a call and explain that you need the one that is the closest match to your thicknesses. Or send him an email with a photo of the one good lens and the dimensions along with his stock numbers for what the lens finder shows you. I'd be very surprised if he didn't help you get a decent physical match. If worse comes to worse, replace both lenses with a matched pair. Most of Shed's achromats are $7.00 ea and $5 total for shipping. Like John said, you're getting close to the point of "not practical" and from an optical viewpoint, a replacement lens is just a "hope that it works".

good luck
dan