Been gathering up the parts for sometime now and have everything on hand now except for 9" tube itself.
Been thinking on the best way to construct the baffle system and it hit me like a ton of bricks yesterday.....
Use carbon graphite arrow shafts cut to the proper lengths to space out the baffles properly, can cut them to lenght, glue in the inserts, drill holes in the baffels and simply insert them sandwiched between the shafts, three shafts per section, ending up with an all in one assembly that I have just slide into the tube and anchor at each end of the assembly.....super lightweight, strong and already black.....
Based on my calculations I will end up with 5 baffels.....using thin aluminum sheet for the baffels themselves.....I dont see any reason it wouldnt work and work well.....any thoughts?
Thanks
Greg
Been thinking on the best way to construct the baffle system and it hit me like a ton of bricks yesterday.....
Use carbon graphite arrow shafts cut to the proper lengths to space out the baffles properly, can cut them to lenght, glue in the inserts, drill holes in the baffels and simply insert them sandwiched between the shafts, three shafts per section, ending up with an all in one assembly that I have just slide into the tube and anchor at each end of the assembly.....super lightweight, strong and already black.....
Based on my calculations I will end up with 5 baffels.....using thin aluminum sheet for the baffels themselves.....I dont see any reason it wouldnt work and work well.....any thoughts?
Thanks
Greg
20" MidnighTelescopes f/5
8" f/16 Muffoletto Achro
Meade 6" AR6 f/8.0 Achro
Celestron C11
Parallax PI250 10" F/5 Newt
Vixen FL102S,NA140SS,R200SS
80mm Stellarvue Nighthawk with WO APOupgrade lens, 90mm f/16.67 Parallax Achro
LXD75/LX200, Mini-tower, GP-DX, CG5 ASGT, LXD650, GM-8, G11, GM-100, GM-150EX, GM-200 and a Gemini G40
4" portable AP convertable 44" or 70" pier
Stellarvue M7 Alt-Az, TSL7 Pier/Tripod
12.5" f/5 MidnighTelescopes DOB Swayze optics
Monroe GA