Image of the day

Captured by
Arthur Hogan

Wizard Nebula

My Account

New to Astromart?

Register an account...

Need Help?

Alum vs Stainless mirror cell triangles

Started by Grumpy_one, 06/05/2004 03:50PM
Posted 06/05/2004 03:50PM | Edited 06/05/2004 03:51PM Opening Post
Making the triangles for my mirror cell for a full thickness 12.5 f/6.4. I'm looking for pro's con's for alum vs ss. Thanks
Posted 06/05/2004 04:39PM #1
Hi David
I've never made a mirror cell but it seems to me that the issues of weight, flexure, expansion, etc., each has pro's and con's which make it a wash. But coming from a machining point of view, the aluminum would be much easier to work with.
Just my $.02
Buck
Posted 06/06/2004 03:15PM #2
The next cell will have alum smile
Posted 06/07/2004 01:54PM #3
I think the thermal properies comment is the key here. I would hate to have to try to get that stainless into thermal equilibrium. My experience, and one of the big complaints I have heard about the Meade dobs is that it uses an iron plate behind the mirror as a counterweight. The mirror ends up never getting into thermal equilibrium.

Charlie

Fort Lewis Observatory: (37.238, -108.052) ~2360m (7744 ft.) elevation.
Darkness - typically 6.5+
Scope - Meade 16" LX200; f6.3 focal reducer
Focus - JMI Smart focus
Camera - SBIG ST-10XE; (~.5"/pixel)
Guiding - AO-8 and/or Meade 5"/DSI/PHD
http://www.fortlewis.edu/observatory