First night with John Dobson (long)

Started by Grumpy_one, 04/22/2004 04:33PM
Posted 04/22/2004 04:33PM Opening Post
Please be patient, English was never one of my better skills. But I will attempt to post my progress on my 12.5 mirror here. Tuesday night was the first night. We all gathered in the basement of a church. This church is in rural Battleground, Washington. It is converted to an astronomy shop. The only one in greater Portland. Seans Astronomy Shop. We had made these benches to grind on. I sit low enough on it to allow my body weight to add pressure as I grind. I straddle the bench with the mirror in front of me. My good friend Dan and I arrived in the rain, slightly late, with these bulky benches, (they’re small enough to fit two of them in the back of Dan’s Civic). We go down these stairs, with benches in hand, there is about a dozen or so people with these home made benches of all different styles, getting situated, looking for a good place to set up, and there in the middle of the room is this little old man, white hair in a pony tail, helping people set up their benches. This is John Dobson. He looks like a ‘60’s throw back. He’s all of about 5’6-8”, 100 lbs dripping wet. His pony tail splits his shoulders. After I pay up and get my mirror and tool, I get the wrong size and have to wait my 12.5. Dan is doing an eight inch mirror. While everyone is securing the tool to their bench, John want’s the attention of the room. At first people are eager to hear his words, and the room quiets. He starts out with a couple of instructions, and a couple of stories. I get the feeling that no one here has ever done this before. The instructions are quick and short. He ask’s if there are any questions, and it’s quiet as a church, or in this case, a church basement. After about a minute, the questions start. Someone asked about “dunking”. I didn’t hear the whole question, but I did hear the response, “these aren’t doughnuts, these are mirrors”! We get turned loose. (cont)
Posted 04/22/2004 04:34PM #1
The room is quite full, the mirrors range from 6” to 14”. John walks around the room giving instruction’s to individuals as they need it. I pay attention to these individual instructions, and managed to not get yelled at all night. There is quite a buzz in the room. Everyone seems to be exited to get started. After a while, John wants the attention of the room once more. It takes a raised voice and a “shut up” from John to get the room silenced once more. We were warned about his yelling at one of the pre class meetings, now we get to see it first hand. Johns yelling is quite harmless. Although his voice is raised, it’s not very loud. After some new instruction, and more stories, we continue to grind some more. It doesn’t take long before I have to take off my sweat shirt. Looking around the room, others are doing the same. The class is mixed, in one corner is a father and son team with a mirror each, next to me on my right is a husband and wife team on one big mirror, it looks bigger than my 12.5, and I guessing it’s a 14. My friend Dan is across from me, we trade notes back and forth as we get new tid bits of information. By the end of the night, we seem to get the hang if it. Two and a half hours later, more the half of the class has left to go home. We check our mirrors with a straight edge, there is a curve in this chunk of glass that we been grinding on! There is only a couple of die hards left. A gentleman with a 6 inch checks his curve with a straight edge. John needs a dime. He lays it on the glass, the straight edge clears the dime. Evidently, too much curve. Sean checks the focal length with a flash light. It’s about a f6. This is the gentleman’s first telescope, and doesn’t quite understand the difference between a slow and fast mirror. Sean explains the pro’s and con’s, he seems to be content on his work. This guy rough grinded a 6 inch mirror in one night. This gives me hope that I can finish my 12.5 this year. We clean up our mess and head home. It was a long night, but we didn’t notice. It’s 10pm. Dan and I talked about the previous 3 hours the whole way home. I was in bed an hour later, it felt like the first night after xmas day. I was exited about this whole adventure. Thanks for reading, DaveT

I know this was a long post, the others will be shorter.
Posted 04/26/2004 06:20PM #2
Or I should say, the second night of grinding. The second night with John was less hectic. There were a few no shows. We arrived a little early and examined our mirrors that we had worked so hard the few nights before. I noticed that my efforts had not reached the edge of the glass. I looked for John, but he hasn’t arrived yet, as I was informed, “it’s 3 minutes to 7, he should be down soon”. I found out later, everything was fine. Doing a 12.5” mirror as a first mirror makes me a little nervous. Within a few minutes the class was a buzz again, everyone grinding away. It didn’t take long for the sweat. The only things missing are blood and tears. I noticed the fan was not in the room this time. I went upstairs to look for Sean, there was the fan, trying to pull the air out the back door. The weather was beautiful. I found my new grinding spot, on a slab of concrete behind the church, outside. By the time I got my bench and glass outside, I was joining another grinder from the class. There were no clouds and a slight breeze, I couldn’t wait to see what the seeing was like in this rural part of Washington. I didn’t get a much grinding done although the conditions were great. It turns out I was moving my lips more than my arms. After the sun set, we joined the others in the basement. As I came down the stairs, there was John, helping one of the students. He was working the water and grit as the student grinded away vigorously. She seemed to enjoy the help, John seemed to enjoy giving the help. As for the rest of us, it was yelling as usual. I watched as John poured the grit on the glass, more grinding and then gave “two” rinses of water. I tried that method on my glass, it seemed to work pretty good. She finished rough grinding her 10” that night. By this time it seems that the 6 and 8 inch mirrors are completed with the rough grinding. I’m still grinding away at my 12. A lot of people were checking the focal lengths before the sun set completely. My friend Dan’s 8 inch is at approximately 6 feet. I’m eager to check mine tomorrow. (cont)