I was playing with a Barlow lens the other day and noticed I could to the 'variable' thing just by playing with the position of the lens in the focuser. Segueue to now and it occurred to me that one might use this effect to make binoculars or a binoscope with objectives that didn't quite match focal length-wise.
Then the only thing to need tweaking might be the relative positioning of the objectives in their tubes forward/backward so eyepieces remain parallel. For refractors this isn't so much of a problem, but for reflectors the focuser positioning versus secondaries creates other issues, such as relative brightness- leading to the second possibility- using objectives of different aperture (with or without masks).
So one could end up with a Frankenstein kluge- the question is whether it will work, regardless of whether it will be pretty?
Thanks.
Jess Tauber
Then the only thing to need tweaking might be the relative positioning of the objectives in their tubes forward/backward so eyepieces remain parallel. For refractors this isn't so much of a problem, but for reflectors the focuser positioning versus secondaries creates other issues, such as relative brightness- leading to the second possibility- using objectives of different aperture (with or without masks).
So one could end up with a Frankenstein kluge- the question is whether it will work, regardless of whether it will be pretty?
Thanks.
Jess Tauber