Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

"JB Weld" for mirror cell?

Started by jjacobso, 03/24/2004 06:24PM
Posted 03/24/2004 06:24PM Opening Post
Hi -

I am thinking about building a new scope (14"), and am currently trying to figure out if I will be able to do it with the tools I own.

My biggest concern at the moment is the mirror cell, as I don't have welding equipment. I am toying with the idea of using "JB weld" to make the ladder of the cell, instead of actual welding.

Is this feasable, or am I crazy to consider this?

Thanks in advance for any advice on this...

-Jake
Posted 03/24/2004 06:42PM #1
I am doing this exact same thing.

I used the upper portion of my UO aluminum 12.5" cell and made a lower ladder out of 1" aluminum stock. I used L-brackets to connect all of the pieces with machine screws and Loc-tite. I am going to use JB Weld to fill in all of the joints. This should make it more rigid than it is now. I will then wire brush the whole ladder and prime and paint with Krylon Ultra Flat Black. Not bad so far. I'll try to post pictures.

Clear skies,

Tim Hornbeck
Posted 03/26/2004 04:39AM #2
Hi Jake --

The brittleness of "JB Weld" is certainly an issue. I've successfully used it in combination with metal pieces which could be bolted together (one of the pieces tapped) for extra rigidity. Roughing up the surfaces to give the "JB Weld" more surfaces to lock onto also lessens the risk of things coming loose.

Bob Polcyn