Image of the day

Captured by
Michael Scherman

M17 Swan-Omega Celestron C6 Hyperstar2

My Account

New to Astromart?

Register an account...

Need Help?

Longer term experience with the Dob Driver II?

Started by [email protected], 02/09/2003 02:01PM
Posted 02/09/2003 02:01PM Opening Post
Hi all --
Tracking with a Dob would be great. Is the Tech 2000 system reliable enough to be taken seriously? Their website makes it sound easy. What has field experience been like?
Any help appreciated.

Bob Polcyn
Posted 02/09/2003 03:48PM #1
Hi Bob,

I installed a Dob Driver II on my 8" F/7.5 over five years ago and it still performs very well. A year or so ago I discovered that the cover to the hand paddle was loose. Apparently a couple of the anchors (for screws) built into the cover had broken. I called Tech 2000 and explained the problem, at which time they said to send it back to them. I received it back in short order with a new cover. There was no charge.

The only change I've made to the mount since first installing the kit was, to take the (supplied) azimuth roller bearings back off and re-install teflon pads as I had originally installed on the mount. It moves much smoother now when "hand guiding" without the driver.

By the way, on nights which permit 300X (rather frequent here on the Gulf Coast), there is no noticeable vibration in the eyepiece (eyepieces actually, I use a Bino Vue). I ordered the DD II with the high resolution motors/gears which costs a bit more, but well worth it in my opinion.

Finally, I find using the Bino Vue in this guided alt-az mode very comfortable (as opposed to rotating the tube on a German mount when moving around the sky). And the ability to pan around the Moon at high power is also a nice extra.

I would not hesitate recommending the Dob Driver II as long as visual observing is your intent. If you have some sort of imaging in mind, you may want to consider an equatorial platform instead.

Pat