[COLOR="Purple"]Well, the 3 day weekend allowed me some time to work on the rest of the cell and mirror box for my 18.75" cellular mirror scope project. I built in a fan to blow through the hole in the back plate of the mirror. It will blow on the back of mirror front plate and should cool the mirror very quickly since the front plate is only 5/8" thick. I've been told that even without a fan, the mirror should be getting close to ambient after only 30 minutes. My mirror box is kinda tight to keep the size manageable so some active cooling will be good.
This pic shows the front of the mirror cell with the centering plug sticking up through the plywood.
Bill[/COLOR]
This pic shows the front of the mirror cell with the centering plug sticking up through the plywood.
Bill[/COLOR]
Attached Image: