[COLOR="Purple"]...of in-field repairs. Or something like that.
I was out in Big Bend National Park this past week for an observing trip and my EQ platform quit tracking. Turns out it needed a recharge of lapping compound to give traction between the drive wheel and the sector that rides on it.
I failed in two ways: 1. I didn't think to tune up the platform before I left, where I would have noticed that it was time for a recharge. And 2. I didn't take the lapping compound with me in my usual in-field tool kit. DOH! :S
So after 2.5 nights of tracking, I was suddenly not tracking. The next morning I figured out what was wrong but had no way to get ahold of lapping compound out in the middle of no where. So like any good scope builder, I used what I had available to make a fix. Since lapping compound is basically grease + grit, I tried to figure out what I could substitute in the field. I decided that toothpaste would substitute for grease and dirt would substitute for grit.
Here's a pic of the drive wheel after an application of minty fresh UltraBrite toothpaste. As a bonus, after the application of the toothpaste, the platform smelled so nice, although that might have been a bad thing being in bear country.
In the next post you'll see the drive wheel with the dirt on it.
Bottom line, it worked during daylight testing but the 50mph winds that night kept me from trying it out on any stars. I'm pretty sure it would have worked okay for maybe one night, perhaps with a recharge of the dirt needed during the night.
Now that I'm home, I'll clean everything and rechage properly with lapping compound and I'll throw the lapping compound in the tool kit.
Use what ya got if ya don't have what ya need!
Bill[/COLOR]
I was out in Big Bend National Park this past week for an observing trip and my EQ platform quit tracking. Turns out it needed a recharge of lapping compound to give traction between the drive wheel and the sector that rides on it.
I failed in two ways: 1. I didn't think to tune up the platform before I left, where I would have noticed that it was time for a recharge. And 2. I didn't take the lapping compound with me in my usual in-field tool kit. DOH! :S
So after 2.5 nights of tracking, I was suddenly not tracking. The next morning I figured out what was wrong but had no way to get ahold of lapping compound out in the middle of no where. So like any good scope builder, I used what I had available to make a fix. Since lapping compound is basically grease + grit, I tried to figure out what I could substitute in the field. I decided that toothpaste would substitute for grease and dirt would substitute for grit.
Here's a pic of the drive wheel after an application of minty fresh UltraBrite toothpaste. As a bonus, after the application of the toothpaste, the platform smelled so nice, although that might have been a bad thing being in bear country.
In the next post you'll see the drive wheel with the dirt on it.
Bottom line, it worked during daylight testing but the 50mph winds that night kept me from trying it out on any stars. I'm pretty sure it would have worked okay for maybe one night, perhaps with a recharge of the dirt needed during the night.
Now that I'm home, I'll clean everything and rechage properly with lapping compound and I'll throw the lapping compound in the tool kit.
Use what ya got if ya don't have what ya need!
Bill[/COLOR]
Attached Image: