[COLOR="Purple"]The tube connectors arrived so I tried them on two of the short tubes that I have that I'm hoping to make into one longer tube that can be broken down into two pieces. Seems to work well! The assembled tubes are over 7' long and when screwed together are very stiff at the joint.
The two pole sections do not line up exactly; offset laterally from each other due to the "slop" in the connectors. When screwed together, the entire tube is straight, just offset a little at the joint.
The hardware adds about 4 ounces to the tube weight, acceptable in relation to the total weight of the long tube, not to mention the convenience of being able to transport the tubes broken apart instead of in a single 7' length.
1st pic is the hardware used to join the poles.
Bill[/COLOR]
The two pole sections do not line up exactly; offset laterally from each other due to the "slop" in the connectors. When screwed together, the entire tube is straight, just offset a little at the joint.
The hardware adds about 4 ounces to the tube weight, acceptable in relation to the total weight of the long tube, not to mention the convenience of being able to transport the tubes broken apart instead of in a single 7' length.
1st pic is the hardware used to join the poles.
Bill[/COLOR]
Attached Image: