Is this a good scope? And is ECM the coatings on the lens? What is a good price for a OTA like this with avg cosmetics and good optics? Will a LXD75 hold this well with a Celestron 80ED spotter/guider? How about a LXD650? Or maybe a better question is what is the minimum mount to put these two OTAs on? Then add AP to that need? Thanks for all the help here.
Looking at a Meade 10" SCT LX50
Started by jobberone, 04/14/2008 07:15PM
Posted 04/14/2008 07:15PM
Opening Post
Posted 04/15/2008 02:57AM
#1
Hello Michael!
The coatings are actually EMC, and are actually pretty good...
As far as a mount goes, the 10" SCT is pretty heavy, and with another scope on top, it would be quite a task for anything short of an Orion Atlas (IMHO)... (unless you want to go even higher end)
The Atlas is rated for 40lbs (NOTE: for astrophotography I would try to stay close to half of that).
The 10" SCT + small refractor + dovetails + rings = close to 20-30lbs
Hope this helps a bit,
Clear skies! 8)
The coatings are actually EMC, and are actually pretty good...
As far as a mount goes, the 10" SCT is pretty heavy, and with another scope on top, it would be quite a task for anything short of an Orion Atlas (IMHO)... (unless you want to go even higher end)
The Atlas is rated for 40lbs (NOTE: for astrophotography I would try to stay close to half of that).
The 10" SCT + small refractor + dovetails + rings = close to 20-30lbs
Hope this helps a bit,
Clear skies! 8)
Ivan Gastaldo 8)
Coconut Creek, FL
Ivan's Observatory
Lat 26N 16' 48" Long 80W 10' 48"
[COLOR="Red"]Personal Website:[/COLOR] http://www.ivangastaldo.com
CCD Imaging and Processing/Deep Sky - Moderator
I like to complain about everything - Moderator
Funding Member