Bryan and James

Started by geomorph, 12/16/2003 04:38AM
Posted 12/16/2003 04:38AM Opening Post
I finally took time to photograph my digiscoping setup tonight.... sorry about the delay Bryan.

Let me start by saying that I am no expert at digiscoping, but I occasionally get some really good results with the following setup (see photo):

Nikon Coolpix 4300 with optional extension tube
LensPlus 2Plus LE adapter http://www.lensadapter.com/products.htm
Swarovski ATS65 with either the stock 20-60x or the widefield 30x eyepiece

The photo shows all of the pieces before assembly....

Attached Image:

geomorph's attachment for post 11536

"The expression of the beautiful is in direct ratio to the power of perception acquired by the artist." (Gustave Courbet)
Posted 12/16/2003 04:56AM #1
Here is the assembled setup. The tube is needed because the lens extends out from the camera body, and cannot be mounted without the extension tube. The adapter works well, but you need to be a little careful to avoid scarring the eyepieces. I can hear you grimacing at the thought of scratching those 2" eyepieces. The adapter doesn't actually allow the screws to touch the eyepiece, but it does require caution when putting it on and taking it off.

The shown pieces seem to work well together, and produce good results, IF the lighting is pretty good. However, if the light is failing, exposures can be 1/4 to 2 seconds, and its pretty tough to get a bird or animal to hold still that long!

I usually just set the camera to auto, and manually adjust the focus on the Swarovski. I have also tried setting the camera focus to infinity, and manually focusing the Swarovski. Generally, I think the results are better when I let the camera autofocus than when I set the focus. I believe that the manual method COULD produce better results, but focusing precisely while using a 1" LCD screen is beyond my ability. The auto shots just seem to come out better, for me.

I have also found that I do much better with a geared tripod head, rather than a standard or ball head. The extra weight of the camera hanging off the back of the scope really throws the whole setup out of balance. If you aim the scope and lock a standard head, the extra weight causes the scope to sag back just enough to move the target out of the field of view. The geared head allows precise and rapid aiming and adjustment, and it has really helped me to get better shots.

If you have other questions, just ask, and I will try to answer them.

Cheers,
Tyler

Attached Image:

geomorph's attachment for post 74150

"The expression of the beautiful is in direct ratio to the power of perception acquired by the artist." (Gustave Courbet)