Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

Jupiter f25 8/1/07

Started by fugardi, 08/02/2007 09:53PM
Posted 08/02/2007 09:53PM | Edited 08/02/2007 10:11PM Opening Post
Haven't got my peltier cooler yet, so I waited 2.5hrs to cool my C11 mirror in hopes of catching one last Jupiter in hazy but average seeing. Sadly, even with that much time, my mirror could only achieve 1.2degC within ambient. Seeing was not even average since Ganymede barely showed on my computer screen and I was unable to pull it out of the final image. I was able to improve my collimation as I checked it on nearby Altair. Best 350frames stacked, toucam + IR + 2.5x barlow.

Regards,
Steve

Attached Image:

fugardi's attachment for post 38109
Posted 08/02/2007 09:56PM #1
Even using the lymax for 2.5hrs after a 90degF day couldn't pull the glass closer than within 1.2degC of ambient

Regards,
Steve

Attached Image:

fugardi's attachment for post 115804
Posted 08/02/2007 10:01PM #2
Stacking a little over 100frames from Altair @f25 focused & defocused enabled me to achieve my best collimation to date. These final shots were taken with the dew shield on. Basically, I only have about 30min to tweak the knobs before dew sets so I make sure to have the shield on by then.

Regards,
Steve

Attached Image:

fugardi's attachment for post 115805
Posted 08/02/2007 10:04PM #3
With the bright moon only a few degrees away, conditions were not ideal for imaging Uranus. I tried the 2.5x barlow but the image brightness was too dim. The best 300 frames are stacked and resized 2x.

Regards,
Steve

Attached Image:

fugardi's attachment for post 115806
Posted 08/02/2007 10:09PM #4
I was still out as this last planet reached its transit. At a mag of 7.8, there's no way to use a barlow with my Toucam. At 2.3" in size and low in the sky, I seemed to save the hardest one for last. After losing it several times, I managed to collect a few avis, with the best 300frames stacked 2x resized. Got to bed finally at 3:30

Regards,
Steve

Attached Image:

fugardi's attachment for post 115807
Posted 08/03/2007 01:09AM #5
These are my first lunar shots in a few years motivated by some of Stefan's recent excellent posts. I originally tried to use a 2.5x barlow but the image instability forced me to go prime. I will be putting a nice set of narrow band filters on my wish list. I would have tried to stack different colored filters with my IR filter, but at 3AM I was too lazy to walk all the way back to the garage to get them. I just downloaded the Virtual Lunar Atlas to help confirm what I was imaging, and the program is awesome. http://www.astrosurf.com/avl/UK_download.html

Regards,
Steve



Attached Image:

fugardi's attachment for post 115810
Posted 08/03/2007 01:11AM #6
Some small craterlets can be seen but f25 with the proper filter would help bring them out.

Regards,
Steve

Attached Image:

fugardi's attachment for post 115811
Posted 08/03/2007 01:14AM #7
f10 flats were not used in these lunar images, but I did try to use my f25 flats which of course did not work...

Regards,
Steve

Attached Image:

fugardi's attachment for post 115812
Posted 08/04/2007 10:22PM | Edited 08/05/2007 06:21PM #8
Hi Steve, I've found that the solution to cool down is to prevent scope heat up in the first place. My entire observatory is insulated from top to bottom, this allows high resolution daytime imaging. For most night time imagers there is another benefit. Very thin domes (like aluminum) will super cool to below air temperature on chilly evenings causing cold waves to descend upon the telescope, these will absolutely destroy otherwise perfect seeing conditions, each cold wave acts like a separate lens when your scope is close to focus you'll notice their multiple image effect in the eyepiece. I've found that an insulated dome completely eliminates this problem. Cheers, Dan 8)