I am designing (another) camera mount, this time without an EP diagonal for a common Fujifilm 2400 digital camera. My problems have been two-fold, focus and camera alignment. Ignoring focus techniques for right now....my question is:
Can I modify my 4" refractor objective lens cover by "melting" a small pin hole using a hot pin in the exact center of the cover to get diffraction rings from a local light source?. If it can work....I could be sure the camera is aligned by the symetricity of the diffraction rings around the pinhole light source.....or is my thinking incorrect?. I cannot use a star for this purpose. I have neither the high power EP(only have a 20 mm.), clockdrive, or viewing location at this time and must work indoors through a window to view anything afterward...so this is just to guarantee alignment of camera lenses only. Thankyou for carefully reading this post and any comments or answers. -Larry
Can I modify my 4" refractor objective lens cover by "melting" a small pin hole using a hot pin in the exact center of the cover to get diffraction rings from a local light source?. If it can work....I could be sure the camera is aligned by the symetricity of the diffraction rings around the pinhole light source.....or is my thinking incorrect?. I cannot use a star for this purpose. I have neither the high power EP(only have a 20 mm.), clockdrive, or viewing location at this time and must work indoors through a window to view anything afterward...so this is just to guarantee alignment of camera lenses only. Thankyou for carefully reading this post and any comments or answers. -Larry