Image of the day

Captured by
Ruben Tommasi

Andromeda Galaxy (M31)

My Account

New to Astromart?

Register an account...

Need Help?

Finder Reticule Illumination

Started by Halleys_Trauma, 12/28/2007 03:50AM
Posted 12/28/2007 03:50AM Opening Post


I have to date owned 3 of the Tak 50mm finders.

They are in my humble opinion "unquestionably the best finder available" and the views are better then some scopes.

The maximum reticule illumination of my newest one however is really very low. The two previous to this one were considerably brighter.

Does anyone know if this is adjustable or did I just get unlucky.

I would also like to hear if there is another way other then taking apart something pretty much new. I believe the problem is the center of the reticule hairs is not aligned with the LED. I checked them and they are far from where I would expect and it seems like the glass they are on needs to go back towards the eyepiece to center them with the LED.

It is so dim that I have to run the illuminater at maximum to see anything at all and this kills the battery in short order.

The cold weather is making it even worst.
Thank you smile

smile
Posted 12/28/2007 11:35AM #1
You might try removing the illuminator / LED assembly
from the eyepiece and looking in the hole where the
LED goes. Sometimes the reticle carrier has a hole
for the light to enter, which gets mis-aligned relative
to the LED. Or the reticle sits too high ot low in
the eyepiece, and the reticle edge is no longer
illuminated by the LED.
Posted 01/03/2008 06:34PM #2
How new is it? maybe you can get an exchange.

Oklahoma State University--The University of Oklahoma!--GO POKES!! GO STATE!!