Image of the day

Captured by
james carter

North American Nebula NGC7000

My Account

New to Astromart?

Register an account...

Need Help?

custom Orion ED80 mount (LONG)

Started by lutton.7, 03/26/2004 01:19AM
Posted 03/26/2004 01:19AM Opening Post
Here is the link: www.pbase.com/eagle92395/astro_pics

Here is the mount that I designed and made in a few days. When I got the ED80, the small EQ mount that was with it needed to go. For one, I hate EQ mounts for visual use, and this one would make you sick trying to look at anything. The shakes and irritating motions were enough to make me rip the mount apart and make a new one. Here are some of my design criteria:

1. The mount should be alt-az and very sturdy
2. Needs to be very easy to use
3. I need to be able to move it easily in a Camry along with a LX200, eyepiece case, battery...etc etc.
4. Needs to have a good range of balance... my 32mm 84" FOV and Meade 14mm UWA are huge eyepieces and need to work well with this.
5. Needs to be cheaper than what I can buy for $300
6. Needs to be "sexy", I can't have this great scope on some crappy little mount can I???

After some thought and a lot of web surfing, I decided that none of the mounts I'd seen so far answered all of my needs.

As you can see, the scope is held about 12" off the top of the tripod. This serves THREE purposes, it elevates the scope (DUH!) and it also allows the scope to point to zenith without bumping the tripod. Having the arms extend upwards instead of straight back also help to balance the azimuth axis so that the motion is smoooooooth!

Posted 03/26/2004 01:19AM #1
That cool little black box (no, it isn't indestructable like on an airplane) also serves dual purposes. First, its main purpose is a counterweight for the azimuth axis... and since it has to be there, I figured it should be a useful hunk of wood. So I designed it to hold all of those little eyepiece, finder and scope caps that seem to walk off every single time I'm out! It'll hold pretty much any little accessory like filters or extra batteries.

For the declination (altitude) axis, things got a LOT tougher. With the Meade UWA weighing 2.5lbs or some ridiculous weight, balance became a serious issue. So the sled that the scope rides on has 3 different adjustments... the altitude hubs (white HDPE) have 4" of travel. The rings can also move almost 2" each on the sled. Finally, the scope can be moved in the rings to help aid the adjustments.

The azimuth bearing was made from a disk of HDPE and some ebony star samples from Home Depot! No need to buy...haha!

The azimuth bearing is HPDE riding on 4 little HDPE pads.

The wood is Red Oak, because I think it looks nice and when I was at the hardware store, it seemed to dampen vibrations better than the others. I basically held the board up and smacked it and felt the vibrations. Not too scientific, but I'm very happy with it. I still need to cover the white bearings with some wood or black paint, and I plan to add a small handle to the back so that I don't have to grab the focuser/visual back to move the scope.


Overall, the mouht is exactly what I needed for this scope. It is light and easy to use. It looks nice enough that my wife doesn't mind it sitting out and ready to use!!

If you'd like more details, contact me. The nicest thing about my mount is that I designed it and I'm very happy with it... feels personal I guess.

Here is the link: www.pbase.com/eagle92395/astro_pics
Posted 03/26/2004 06:40PM #2
Nice setup Anthony...
Good work on that mount, looks very nice, and sturdy too.

Thanks for sharing,


Ivan
smile

Ivan Gastaldo 8)
Coconut Creek, FL

Ivan's Observatory
Lat 26N 16' 48" Long 80W 10' 48"
[COLOR="Red"]Personal Website:[/COLOR] http://www.ivangastaldo.com

CCD Imaging and Processing/Deep Sky - Moderator
I like to complain about everything - Moderator