Image of the day

Captured by
Ruben Tommasi

Andromeda Galaxy (M31)

My Account

New to Astromart?

Register an account...

Need Help?

Mirror shipping and packing

Started by fblue, 05/03/2005 08:45PM
Posted 05/03/2005 08:45PM | Edited 05/03/2005 09:16PM Opening Post
Well, today I packed my Zambuto 10", Feathertouch focuser and secondary mirror for shipping. It is not time to ship yet, but I wanted to get it done. I deserve a masters degree in packing for the Herculean effort! 8) I boxed it so well that even a UPS Gorilla would have problems ruining it. wink
I used the Zambuto shipping box that is custom fitted with 2" closed cell foam. Then I took an 18"x18"x18" box and lined all sides with 2" Styrofoam sheet. Then the box was placed inside the shell and covered with a 4th sheet of 2" Styrofoam. Then I put my focuser and secondary on that sheet and fitted 2" foam all around them so they were solidly packed and custom fitted another 2" foam sheet to cover them, then one more 2" sheet for spacing and finally I put another 2" cap sheet on top of the whole thing. That is 10" on the top in case they put some thing on top of it. I took pictures at every step to show the way it was packed in case of any accident along the way. I will not seal it completely until it is shipped so that it can be inspected before it is sealed so the shipper can not say it was not done correctly. Yeah, it was overkill for sure, but after this last horror story, I am taking no chances with this excellent mirror that I can not replace.

Attached Image:

fblue's attachment for post 23927

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 05/03/2005 08:58PM #1
Floyd

I just hope some UPS or FedEx Gorilla doesn't see your post and consider it a personal challenge to test out your packaging.

Truthfully, it looks like the way to go. I recently sold an FS-102 OTA and will be taking a similar approach to packing and shipping.

Thanks
Steven Jindra
Posted 05/03/2005 09:03PM #2
Looks great Floyd!
Good luck! 8)

Ivan Gastaldo 8)
Coconut Creek, FL

Ivan's Observatory
Lat 26N 16' 48" Long 80W 10' 48"
[COLOR="Red"]Personal Website:[/COLOR] http://www.ivangastaldo.com

CCD Imaging and Processing/Deep Sky - Moderator
I like to complain about everything - Moderator
Posted 05/03/2005 10:48PM #3
But..but..but where is the steel diamond plate box on the outside. Good gosh man, you forgot the most important part, what were you thinking. shocked
Buck
Posted 05/04/2005 11:53AM #4
Great job, Floyd.

The Spectrum Coatings web site has excellent instructions (with pictures) on packing mirrors for shipment - very similar to what Floyd did:

http://www.spectrum-coatings.com/Telescope-Mirror_Packing.htm

Doug