Image of the day

Captured by
Arthur Hogan

Wizard Nebula

My Account

New to Astromart?

Register an account...

Need Help?

Telepod tripod question

Started by Dm3_87, 12/19/2003 01:29AM
Posted 12/19/2003 01:29AM Opening Post
Just a quick question,

Will the telepod tripod support a unistar or other mount, or just the telepod? I was considering a bogen, but the telepod tripod is much more affordable.

Thanks for your input,
Marc
Posted 12/19/2003 04:46PM #1
Its according to what scope you put on it. I had a Skywatcher 102 f/5 mounted on a Telepod and it was fine. Then I bought a Televue 102 and had to go to a beefier tripod. I now have my TV102 mounted on a Telepod head / Bogen 3246 combo. It works nicely up to about 150-200X. Yes the Telepod tripod will mount to a Unistar physically, but will likely not be stable enough. Talking with the guy at Universal Astronomics, he advised that mounting my TV102 on a Unistar/Bogen 3246 would be marginal; he suggested a heavier tripod. And the Bogen 3246 is much beefier than the Telepod tripod.

Eddie
Posted 12/19/2003 04:55PM #2
Marc,

If the Telepod tripod has a 3/8x16 stud (I'm pretty sure it does), it will work with the Unistar mount. I'm assuming you mean the Unistar Light, which is more in the load capacity class as the Telepod. In the long run, you'd probably be happier with either a Bogen 3036 or 3046 (Manfrotto 075 or 028) because they are much more stable. FWIW, I use the following rule of thumb for photo tripods used for astronomy -- select the tripod based on one-half the tripod manufacturer's rated load spec, and be sure to include the weight of the mount itself (Unistar or Telepod) + telescope + diagonal + finder scope + heaviest eyepiece in your calculations. Bogen rates both the 3036 and 3046 at 26 lbs, so half that is 13 lbs. I believe the Telepod tripod is actually made by Davis & Sanford, and is closer to the Bogen 3001, which is rated at 11 lbs or perhaps the 3011, which is rated at 13 lbs.

Jim