Image of the day

Captured by
Bruce Karbal

VDB 142 Elephant Trunk HOO

My Account

New to Astromart?

Register an account...

Need Help?

A Diamond In The Rough??

Started by web0178230, 02/23/2007 03:10AM
Posted 02/23/2007 03:10AM Opening Post
[COLOR="Purple"]Here's my project du semaine! Like I need another project!!

It's an '80s vintage Meade 60mm finder. I picked it for a song (Thanks Mark!) as a rehab project.

It's obviuosly well used but seems to have decent optics with the original .965 EP. The focuser is helical and fairly smooth. There are a lot of screw marks from the rings it was mounted in. Other than those, the OTA is in pretty good shape. Every part of this thing is metal as far as I can tell. No plastic here!!

The diagonal is is pretty bad shape with a crack and corrosion/rust on the back screws. It will probably have to be abandoned in favor of a hybrid .965 to 1.25" diagonal. Then I can use whatever 1.25" EP works best...I'm betting the 19mm Panoptic will be a winner!

So far I haven't been able to remove the dew shield from the objective cell. I'm assuming it's a screw on but maybe it's a press fit? I had another refractor that acted the same way and I had just about given up on it when suddenly the dew shield unscrewed easily. I'll try some gentle persuasion with strap wrenches to see what happens.

Long term I want to clean everything up and do a nice paint job on it. I've been wanting to try a refractor paint job and this baby just screams out for new paint. Some Bondo...some sanding...cool paint...and this thing will be pretty cool!

More as I progress....
Bill[/COLOR]

Attached Image:

web0178230's attachment for post 35921
Posted 02/23/2007 02:16PM | Edited 02/23/2007 02:16PM #1
Hello, Bill. I have one of the straight through versions -- Meade 9X60. Has a helical focuser and takes .965 eyepieces (interchangeable).

The finder had a 3.5-degree field of view, which is rather small for a finder. I recently modified it by adding a Celestron wide field Kellner. However, the new eyepiece would not come to focus, so I cut the tube and reattached the focuser with three screws.

The finder is now a 12X60 with a 4.3-degree field of view. Optics are very sharp. Gamma Andromedae is an easy split.

The dew cap on mine does screw into the lens cell. Once removed you can get to the threaded ring that holds the objective in the cell. On mine there are no slots for a spanner wrench, so removing the objective retainer might prove difficult. On the other hand, it is a cemented objective, so both surfaces can be cleaned without removing it from its cell. Good luck on refurbishing your right angle version.

Dom Q.

Attached Image:

daqua's attachment for post 111854
Posted 02/24/2007 04:14AM #2
I've rehabilitated tubes like that one. I used a pice of 1/2" steel rod as mallet, and gently tapped from the inside while holding the tube with the ding against firm leather on a solid (aluminum plate) backing. Takes a long time, but you can get it to where the repair is just sanding, not bondo. Hard to do in a long tube, I suppose, but the furthest I ever tried to reach in was about three inches.

I was inspired to try this by a trip to Mexico I took long ago. In Zacatecas, a young man approached us and offered to fix a nasty-looking dent on the fender of our old Dodge PowerWagon. He held the leather on the paint with one had, and tapped with a rock from the inside with his right hand. Took him about 20 minutes!