I had a clear night to measure the distance between the UTA and the mirror box. I set the mirror box/rocker on the ground pointed at zenith. I made a couple of long "arms" from some scrap oak and screwed these to a ladder to suspend the UTA over the mirror box. Had to raise the arms a couple of times, but I finally saw some focused stars. I measured from the bottom of the split block holes to the bottom of the UTA and it was exactly what I figured from my scale drawing, 38 inches. I then cut the truss poles two inches longer and put the scope together for the first time. The finished eyepiece height will be about 5'3" which is perfect for me at 5'6". The last thing I have to do are the wheel barrel handles and their threaded inserts.
I can't believe I'm almost done.
I can't believe I'm almost done.
Attached Image: