Image of the day

Captured by
james carter

North American Nebula NGC7000

My Account

New to Astromart?

Register an account...

Need Help?

Is it worth pushing this glass?

Started by marcin, 10/03/2007 01:29AM
Posted 10/03/2007 01:29AM Opening Post
Hi everyone! smile
I salvaged an objective from an ancient projector and after disassembling it I found three lenses: plano-convex, biconcave and asymmetrical biconvex. Their diameter is 3.5" (90mm) and focal length of the array f=16" (400mm). I put them back together and tried to look with the objective at the Moon, aligning it with different eyepieces. Magnification seemed to be right for f=400, but naturally I wasn't able to perfectly focus the image.
First I thought to build a refractor, but there are few problems. I know nothing about quality of the lenses and have no idea how to measure it. Moreover the lenses aren't multi-coated.
The second thought is to build a small, planetary reflector. I would use plano-convex lens as a blank, supporting convex side somehow. The biconvex lens could be a tool, since one side is almost flat. It could be a nice, piggyback addition to my 8"f/6...
Is it worth it? How fast can I go with 3.5" for Moon and planets observing? Any ideas how to support convex lens, so it would stay in place during grinding?

Or, should I try to build a refractor? I am not into imaging, just observations, would it suffice?

Thanks

Attached Image:

marcin's attachment for post 38980

8" f/5.9 truss tube newtonian, made from scratch 8)
Posted 10/04/2007 01:25AM | Edited 10/04/2007 01:25AM #1
OVER MY HEAD, but somewhere in the Amart archives if I recall correctly there is a discussion on lens element spacing.

IIRC, the spacers, if any in that lens as you received it are probably too thick to let it focus at astronomical infinity with a quality image. Spacing would be closer for more distant objects. NO guarantee that the lens will work well as much more than a wide field telescope, yet that may be its happy future in your hands.

Good luck on your project,
bill