[COLOR="Purple"]Remade the rocker sides today. Mounted the alt bearings (temporarily) today. Got to thinking about all of the tools I've accumulated over the years that I use to make telescopes.
Today I used:
Table saw
Jig saw
Band saw
Oscillating belt/spindle sander
Many clamps
Hand held belt sander
Cordless drill
Hand held block plane
Hand held sanding block
Several tape measures
Squares
Knife
Didn't use the router today but it gets a fair amount of use depending on the project du jour. Didn't use the drill press today either. The pieces of wood I was working with today are kinda large to be drilling with a drill press.
No real point to this post except that having these tools makes it a lot easier to make things like telescopes fairly accurately.
Bill[/COLOR]
Today I used:
Table saw
Jig saw
Band saw
Oscillating belt/spindle sander
Many clamps
Hand held belt sander
Cordless drill
Hand held block plane
Hand held sanding block
Several tape measures
Squares
Knife
Didn't use the router today but it gets a fair amount of use depending on the project du jour. Didn't use the drill press today either. The pieces of wood I was working with today are kinda large to be drilling with a drill press.
No real point to this post except that having these tools makes it a lot easier to make things like telescopes fairly accurately.
Bill[/COLOR]
