Image of the day

Captured by
Michael Scherman

M17 Swan-Omega Celestron C6 Hyperstar2

My Account

New to Astromart?

Register an account...

Need Help?

Jupiter f25 7/25 W/GRS & Io

Started by fugardi, 07/26/2007 05:15AM
Posted 07/26/2007 05:15AM Opening Post
I recently modified my Toucam 840 to use 900nc firmware. For the first time, I used YUK2 mode with the built-in image enhancer and saturation & contrast set to 100%. After star aligning on Vega, I adjusted my collimation while waiting for Jupiter to clear the trees. My C11 mirror temp was within 1.0degC of ambient. As soon as I noticed Io in the f25 Toucam field of view, I knew I had the "best" conditions this season. Most times I need to overexpose Jupiter to even see the moons. Seeing was average according to the CSC with a slight yellowish haze in the sky. At 1/33sec, the best 200frames were stacked.

After seeing Anthony's absolutely stunning shots, I almost didn't post, however, for me this was a significant improvement. Maybe in a few years with Jupiter higher in altitude, I'll have this figured out...

Regards,
Steve

Attached Image:

fugardi's attachment for post 38016
Posted 07/26/2007 03:59PM #1
Great shot. Could provide some details on the mods that you made?
Thanks Harold
Posted 07/26/2007 06:16PM #2
Taken 60min past Jupiter's transit which had slightly better image quality. Unfortuneately, my trees block the ideal peak viewing.

Regards,
Steve

Attached Image:

fugardi's attachment for post 115638
Posted 07/26/2007 11:50PM #3
Steve Fugardi said:

I recently modified my Toucam 840 to use 900nc firmware. For the first time, I used YUK2 mode with the built-in image enhancer and saturation & contrast set to 100%. After star aligning on Vega, I adjusted my collimation while waiting for Jupiter to clear the trees. My C11 mirror temp was within 1.0degC of ambient. As soon as I noticed Io in the f25 Toucam field of view, I knew I had the "best" conditions this season. Most times I need to overexpose Jupiter to even see the moons. Seeing was average according to the CSC with a slight yellowish haze in the sky. At 1/33sec, the best 200frames were stacked.

After seeing Anthony's absolutely stunning shots, I almost didn't post, however, for me this was a significant improvement. Maybe in a few years with Jupiter higher in altitude, I'll have this figured out...

Regards,
Steve

Steve, still a good image!

It's all about improving your own images - there are too many variables involved to compare with other data, seeing, scope, software etc.

I really look only at my own data to see if I am improving, and that's what really matters.

regards, Anthony

http://www.acquerra.com.au/astro
Posted 07/31/2007 10:33AM #4
Attached is a 1hour plot of mirror & ambient temps during my cooldown period. You can see even with the lymax I am only able to achieve a 1degC delta. Also during this time I have a box fan running on max blowing into my observatory right onto the scope. The asymptotic slope of the delta suggests that this method will only work if the rate of ambient cooling is slower. I will try this again with a 40mm peliter cooler intially trying to subcool the mirror to 2degC below ambient, and then let it stabilize. Matching the ambient within 1 hr is my goal.

Regards,
Steve

Attached Image:

fugardi's attachment for post 115740