Image of the day

Captured by
Michael Scherman

M17 Swan-Omega Celestron C6 Hyperstar2

My Account

New to Astromart?

Register an account...

Need Help?

Jupiter f30 9/1/09, 4/5 Seeing

Started by fugardi, 09/02/2009 08:01PM
Posted 09/02/2009 08:01PM Opening Post
Last night, I was fortunate to have a 4/5 seeing/transparency and have obtained my personal best f30 Jupiter data. After 3hrs of observatory and scope cooldown, my mirror was a perfect +/- 0.1degC vs ambient. After microtweaking the collimation at f25 on Altair, I re-tweaked at f30 and obtained 0.65arcsec resolution on a stacked basis, using metaguide and a red filter. This matches my previous "best" seeing nights. With my computer outside my observatory and the door closed, I collected avi data using my 1.8x TV barlow with 2.75" of extension, yielding approx f30. Using standard 100% gamma and 0 brightness settings, 1min avis were collected with histograms peaking at 90% of max scale using,
R 1023 gain 30fps
G 995 / 30
B 980 / 15
taken right at the 11:45pm transit (approx 32deg altitude). I've got good data +/- 45min to the peak, as well as new Uranus data to sift through. It was an incredible night, just wish I had a C14!

Regards,
Steve


Attached Image:

fugardi's attachment for post 48132
Posted 09/02/2009 11:04PM #1
Nice & smooth, lots of detail, great colors... well done Steve! 8)

Ivan Gastaldo 8)
Coconut Creek, FL

Ivan's Observatory
Lat 26N 16' 48" Long 80W 10' 48"
[COLOR="Red"]Personal Website:[/COLOR] http://www.ivangastaldo.com

CCD Imaging and Processing/Deep Sky - Moderator
I like to complain about everything - Moderator
Posted 09/03/2009 02:19PM #2
Steve, fantastic picture. What combination of eyepieces you use to microtweek Altair at f/24. Any tricks about SCT collimation. I have C14 but I am always worried about collmation. thanks. Mahesh Yadav
Posted 09/04/2009 06:03PM #3
I reprocessed my 9/1 data using a 150% resize and an alignment to the cloud features, not to the limb as recommended by Mike Salway. The last step resized it back to normal. The final image is slightly better, but the blue / red channels are a bit misaligned at the edges. This can be fixed in photoshop, but I have not had much luck. I also tried multi point alignment in Registax but ended up with gaps. The 128 box with the center of gravity box checked seemed to do the best alignment.

Regards,
Steve

Attached Image:

fugardi's attachment for post 132471