Moon is too bright

Started by racerken, 10/28/2007 02:45AM
Posted 10/28/2007 02:45AM Opening Post
I have a FS-60C SV with a diagonal and a 12.5mm eye piece. The moon is so bright I can't view it for too long.

I understand I need neutral density filters (I would assume).

Question: What kind of filter and where do you place it?

Thanks,

Ken
Posted 10/28/2007 04:14AM | Edited 10/28/2007 07:18AM #1
Ken,

You can screw the filter either into the 12.5mm eyepiece (if you look at the internal of the chrome barrel on the eyepiece you will see that it is threaded)or alternately, if you are changing eyepieces regularly to vary the magnification you can screw the filter into the end of the diagonal. Likewise, the chrome barrel on the diagonal has internal threads for screwing in filters. Baader Planetarium make a Neodymium Mon & Skyglow filter in the 1.25" size. Be advised, if you are using Takahashi eyepieces or diagonal you will find that you will not be able to screw filters all the way, you can only screw filters like the Baader on by one or two threads. God only knows why there is a slight difference in the thread pitch between the Baader filters and the Takahashi eyepieces and diagonal. On a last note only view the moon as it is phasing and not when it is nearly or completely full...way to much light to show any detail and all you will get is a headache.
Posted 10/28/2007 01:16PM #2
Hi Ken -- I haven't done it in a while but I've used a binoviewer (an Olympus microscope head) with my Zeiss 63mm/840mm and found the combination very comfortable to use -- no filter.

Bob Polcyn
Posted 11/01/2007 09:51PM #3
If you want cheap you can cut a hole in some aluminum foil about the size of a dime, center it over the objective(dew shield)and secure it like you were sealing something in a water glass.